Gas Leak Detector

Product Details:

Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Product Description

Gas Leak Detector

PERFORM A MEASUREMENT
   Turn on the device by pressing on "On/Off/Esc".
The device displays its name "FG110".
When it turns on, the device emits a beep then performs a pre-heating phase. This phase lasts 60 seconds. The count of this pre- heating time displays on screen.
During the normal functioning, in the absence of gas leak, the device emits a regular beep*.
Otherwise, if the device detects the presence of gas, the repetition frequency of the beep will increase as the detected concentration increases*.
*The alarm must be activated so that the device emits beeps (see p.3 for the alarm activation).

FREEZE THE MEASUREMENT
During a measurement :
   Press once on "Hold/min/max".
     "Hold" appears on screen and the measurement is frozen.
   Press on "On/Off/Esc" to exit the hold function.
     The device returns to the measurement display.

DISPLAY THE MINIMUM AND THE MAXIMUM
Once the measurement is frozen :
   Press on "Hold/min/max".
   The device displays the maximum value measured since the last questioning at the top of the screen and the minimum value measured since the last questioning at the bottom of the screen.
   Press on "On/Off/Esc" to return to the measurement display.

Gas detectors detect methane, LPG and other hydrocarbons. Kimo's FG 110 is a gas leak detector that has been developed to provide efficient, and reliable quality performance.

Measuring range: 0 to 10,000 ppm, 0 to 1 % vol, and 0 to 20 % LEL
Easy to use
Indication of gas leaking in ppm, % vol, or % LEL
Hold function and min-max values
Adjustable backlight
Verification certificate

Technical Details :

Gaz detection
Sensor	Min	Max
Gas detection	0.00 ppm	10000.00 ppm
Gas detection	0.00 %vol	1.00 %vol
Gas detection	0.00 %LEL	20.00 %LEL

Technical details :

Parameters	Gas detection
Displays	4-line display
IP Protection	IP 54
Battery life	20 hours
Standards	2011/65/EU RoHS II 2012/19/EU WEEE 2014/30/EU EMC 2014/35/EU Low Voltage
Power supply	4 batteries AAA LR03 1.5 V
Probe type	Built-in probe
Protective cover	No
Interchangeable module	No

Instrument Dimensions :
Length	Width	Height	Weight
71.50 mm	34.20 mm	147.90 mm	295.00 g
Operating temperature
Min		Max
0.00 C		50.00 C
Storage temperature
Min		Max
-20.00 C		80.00 C